PRODUCTS CENTER

Email:[email protected]

2 high pressure discharge hose

2" Lay Flat Hose 300'' - Sun-Flow SF10 | IrrigationKing

Sun-Flow 2" Lay Flat sold in 300'' rolls. Free Shipping. 2" Sun-Flow PVC Lay Flat Hose - 300 feet Blue Features: 3-ply polyester yarns. Both tube and cover are extruded

Technical Data Sheet Discarge Assemlies

High-pressure flex hose Special elastomer compound Hose Specifiions Thickness and working pressures at 73˚ F (23˚C) Flexible hoses Size (U.S. Nominal) Wall thickness Working pressure Bursting pressure (standard and external) 1 in. 0.11 in. (2.8

High Pressure Hydraulic Hose, 1SN, 2SN, 4SP, 4SH, R13 and R15

Our standard high pressure hydraulic hose 1SN can in -40 C to +100 C, ID 4.8–50.8mm, OD 11.8–64mm, operating pressure 40–250, burst pressure 160–1000 bar. Table 2: EN 853 2ST/2SN Steel Wire Reinforced Hydraulic Rubber Hose Technical Specifiion Item

2" Camlock Hoses

Camlock 2” suction hoses allow for quick, secure connection to a male camlock on the intake side of the pump. Available in green and clear with reinforced high tensile synthetic yarn and steel helix wire. Our camlock pump discharge hoses are available in blue, black and red pvc, single and double jacket in lengths of fifty and hundred feet.

2" Camlock Hoses - FireHoseDirect

2.0 Inch Cam Lock Hoses Are Available In Lengths of 25, 50, 75, 100 and 300 Feet. Our single jacket mill hose is for light industrial and construction loions where medium water pressure is used. Not intended for structural firefighting.

Air Hose | Water Hose | The Hosemaster

Medium Duty Yellow Lay Flat Water Discharge Hose As low as £3.06 £2.55 Add to Cart REF #8452 25mm - 102mm High Pressure Lay Flat Delivery Hose As low as £24.22 £20.18

High Pressure 2" - Honda Power Equipment: Generators, …

High pressure Pump Centrifugal Type Self-priming Suction Port Diameter 50 mm (2 in.) Discharge Port Diameter 50 mm (2 in.) Litres Per Minute 500 Imp. Gal. Per Minute 110 Litres Per Hour 30,000 Imp. Gal. Per Hour 6,600 Total Head 43 m (141 ft.) 8 m (26 ft.)

2" Camlock Hoses - FireHoseDirect

2.0 Inch Cam Lock Hoses Are Available In Lengths of 25, 50, 75, 100 and 300 Feet. Our single jacket mill hose is for light industrial and construction loions where medium water pressure is used. Not intended for structural firefighting.

HPCO2 Fire Extinguishing System

2 system and consist of discharge flex hose, discharge outlet adapters or check valves, actuation flex hose, Typical High Pressure Carbon Dioxide System Layout DS1094 Revised 02-Nov-2021 EQUIPMENT DESCRIPTION Cylinder Valve: The automatic 2

2" Camlock Hoses - FireHoseDirect

2.0 Inch Cam Lock Hoses Are Available In Lengths of 25, 50, 75, 100 and 300 Feet. Our single jacket mill hose is for light industrial and construction loions where medium water pressure is used. Not intended for structural firefighting.

Goodall Water Hoses | Goodall Hoses

2" - 8" 20 bar 300 psi-40 C to +120 C-40 F to +248 F Heavy duty suction and discharge hose for water-glycol (hydrolube), water and mild chemicals in general industrial and agricultural appliions. Electrical static charge can be safely conducted through the

2" Camlock Hoses - FireHoseDirect

2.0 Inch Cam Lock Hoses Are Available In Lengths of 25, 50, 75, 100 and 300 Feet. Our single jacket mill hose is for light industrial and construction loions where medium water pressure is used. Not intended for structural firefighting.

Technical Data Sheet Discarge Assemlies

High-pressure flex hose Special elastomer compound Hose Specifiions Thickness and working pressures at 73˚ F (23˚C) Flexible hoses Size (U.S. Nominal) Wall thickness Working pressure Bursting pressure (standard and external) 1 in. 0.11 in. (2.8

A/C Hoses & Fittings for Hyundai Sonata for sale | eBay

For 2011-2014 Hyundai Sonata A/C Refrigerant Discharge Hose 11863NJ 2012 2013 (Fits: Hyundai Sonata) 5 out of 5 stars. (1) 1 product ratings - For 2011-2014 Hyundai Sonata A/C Refrigerant Discharge Hose 11863NJ 2012 2013. $30.95. Free shipping. 45 sold.

RUBBER HOSES - INDEX

High Temp. 2 wire hose High pressure hose for hydraulic fluids and aqueous emulsions and water As above but high temperature rubber formulation. Blue cover 22 HT2 Two wire braid High pressure hose for hydraulic fluids, aqueous emulsions, water and air 23

Stainless High Pressure Hose - OmegaFlex Industrial

Series 800 — Annular, Stainless Steel, High Pressure Hose and Braid. Max. Max. OmegaFlex hose and corresponding braid must be used in coination to achieve pressure ratings. Hose sizes 3⁄8″ through 2″ meet ISO 10380 cycle life requirement of 50,000 minimum average cycles at maximum rated working pressure listed above.

: 2 inch lay flat hose

2" x 100 ft - HydroMaxx 150 PSI High Pressure Reinforced PVC Lay Flat Discharge and Backwash Hose - 10 Bar Reinforced PVC Construction 4.2 out of 5 stars 12 $79.99 $ 79 . 99

High Pressure 2" - Honda Power Equipment: Generators, …

High pressure Pump Centrifugal Type Self-priming Suction Port Diameter 50 mm (2 in.) Discharge Port Diameter 50 mm (2 in.) Litres Per Minute 500 Imp. Gal. Per Minute 110 Litres Per Hour 30,000 Imp. Gal. Per Hour 6,600 Total Head 43 m (141 ft.) 8 m (26 ft.)

HPCO2 Fire Extinguishing System

2 system and consist of discharge flex hose, discharge outlet adapters or check valves, actuation flex hose, Typical High Pressure Carbon Dioxide System Layout DS1094 Revised 02-Nov-2021 EQUIPMENT DESCRIPTION Cylinder Valve: The automatic 2

2" Camlock Hoses - FireHoseDirect

2.0 Inch Cam Lock Hoses Are Available In Lengths of 25, 50, 75, 100 and 300 Feet. Our single jacket mill hose is for light industrial and construction loions where medium water pressure is used. Not intended for structural firefighting.

2 inch discharge hose from Northern Tool

Shop 222 2 inch discharge hose at Northern Tool + Equipment. JGB Enterprises Pump Hose Kit — 2in. Dia., 15ft. Suction Hose, 25ft. Discharge Hose, Model# A007-NTEHOSEKIT-2TP

: AMT Pump 055-338 2" High Pressure Hose Kit with 20 ft. 2" Suction and 100 ft. 1-1/2" High Pressure (100 PSI) Discharge Hose, 1-1/2

Buy AMT Pump 055-338 2" High Pressure Hose Kit with 20 ft. 2" Suction and 100 ft. 1-1/2" High Pressure (100 PSI) Discharge Hose, 1-1/2" Fire Nozzle, 1-1/2" x 2" Adapter and Hose Wrench: Accessories - FREE DELIVERY possible on eligible

Stainless Steel Hose - Pacific Hoseflex Pacific Hoseflex | Fluid Transfer & Hose …

ENCAPSULATED PTFE SS1 METALIC HOSE Size : 1/2’’ to 6’’ Working Pressure : 1200 to 6500 kPa Page 48 METALLIC HOSE - ULTRA HIGH PRESSURE Size : 1/4’’ to 2’’ Working Pressure : 9280 to 30378 kPa Page 40 METALLIC HOSE - EXTREME HIGH

OFFSHORE LOADING & DISCHARGE HOSE

Super 300 hose 1987 High aromatic hose Yokohama’s high aromatic hose, suitable for liquids with up to 60% aromatic hydrocarbon content, was developed. This has fulfilled a growing market demand for high aromatic fluids such as high octane gasoline. 1992

High-Pressure Camlock - FireHoseDirect

Item #: DAHP20M15FN -. High pressure type "A" aluminum 2 inch male camlock (Cam & Groove) coupler to 1 1/2 inch NPT threads. Under no circumstances should cam and groove couplings be used for compressed air or steam service! Connections: The male side of this adapter will only connect to 2" camlock.

2 inch discharge hose from Northern Tool

Shop 222 2 inch discharge hose at Northern Tool + Equipment. JGB Enterprises Pump Hose Kit — 2in. Dia., 15ft. Suction Hose, 25ft. Discharge Hose, Model# A007-NTEHOSEKIT-2TP

High Pressure PVC Discharge Hose (7801R) - Capital Rubber Corp

High Pressure PVC Discharge Hose (7801R) Type 7801R HD-PVC Red Discharge Hose is a pump discharge hose designed with a heavier wall for higher working …

Petroleum Hoses – Industrial Suction & Discharge Hoses – Eaton

Discharge Hoses: EHP504 - High Pressure Petroleum Discharge Hose Tube: NBR blend Reinforcement: High-tensile synthetic textile and anti-static copper wire Cover: NBR blend Temp: -35 C to +70 C, (-31 F to +158 F) Pressure: 17,2 bar / 250 psi Tube:

High Pressure CO2 Fire Protection Systems

High Pressure CO2 Fire Protection Systems Featuring innovative high-performance cylinder valves • Patented cost-saving unibody design – does not have separate valve and discharge heads. 1-800-267-8508 • re Moncton • Ottawa • Toronto

High Pressure Hydraulic Hose, 1SN, 2SN, 4SP, 4SH, R13 and R15

Our standard high pressure hydraulic hose 1SN can in -40 C to +100 C, ID 4.8–50.8mm, OD 11.8–64mm, operating pressure 40–250, burst pressure 160–1000 bar. Table 2: EN 853 2ST/2SN Steel Wire Reinforced Hydraulic Rubber Hose Technical Specifiion Item